www.gazinvestproject.com » Chemical products » Chemicals for drilling wells » Regulators of filtration and viscosity » Filtration and viscosity regulator GIP-FILT grade A

Filtration and viscosity regulator GIP-FILT grade A

GIP-FILT grade A - starch polymer, carboxymerization thermally modified polysaccharide


  • stabilization, control of the filtration rate in mineralized and fresh water-based drilling mud systems
  • effectively reduces the rate of filtration in drilling fluids with a high content of calcium chloride and bischofite
  • used in the initial opening of productive horizons
  • Preserves the natural reservoir properties of reservoirs
  • Resistant to aggression salt of potassium chloride and magnesium chloride
  • Compatible with other high-ranking molecular polymers
  • Acid soluble
  • Increases antifriction properties of drilling mud and filter cake
  • Does not significantly change the rheological properties of low clay drilling fluids
Typical properties
  • Appearence: Fine-grained white powder
  • Specific gravity (kg/m3): 1,4
  • Mass fraction of moisture,%, not more than: 14,0

Application guidelines

Add GIP-FILT grade A in a concentration of 20 to 30 kg/m3 depending on the degree of mineralization and the required filtration rate, the recommended alkali range when used from pH = 10.5-12.0

Safety measures

No special requirements for transportation, storage and use. While using, it is recommended to use personal protective equipment (glasses, gloves) and observe personal hygiene rules


GIP-FILT grade A is supplied in multi-layer bags with a nominal weight of 25 kg. Store in a cool, dry place in unopened containers. Keep away from direct bright light and heat

36000, Poltava
Pushkina str., 6
tel: +38 067 577-75-04
tel: +38 067 546-62-72
61072, Kharkiv
23 Serpnya Str., 20-Рђ, Рѕf. 11 
tel: +38 067 577-75-04
tel: +38 067 546-62-72

04053, Kyiv 
Observatorna str., 25 
tel: +38 067 577-75-04
tel: +38 067 546-62-72


Powered by IJI IT GROUP | 1998-2024