System "DF-ECOGOR-GIP"

It is analogue of systems Baradril-N and Flo-Pro with optimal technical properties. It is developed on the basis of practical experience. It is designed for drilling of horizontal and curved wells in reservoir horizons , section of unstable clays and also drilling of super-deep wells. It is practically used at fields of DDC and shelf of Azov and Back Sea. Formulation of "DF-ECOGOR-GIP" system 

• Mineral inhibitor, 60-100 kg/m³; 
• Secondary inhibitor, 0-350 kg/m³;
• Starch stabilizer, 20 – 30 kg/m³;
• Bio-polymer gelling additive, 2 - 3 kg/m³;
• Calcium carbonate, 80 - 300 kg/m³;
• Special filler , 3-10 kg/m3; 
• Bituminized stabilizer , 10-20 kg/m3;
• Ecologically safe grease, 30-50 kg/m3;
• Alkalinity correction agent, 2 - 5 kg/m³
• Defoamer, 1- 2 kg/m³;
• Bactericides, 1 kg/m3. 

• Density, 1050 - 1450 kg/m³;
• Funnel viscosity (FV), 30 – 55 sec.;
• Plastic viscosity (PV), 15 - 30 cP;
• Yield point (YP), 15 – 40 lbs/100 ft2;
• Gel static shear stress (Gels) 10 sec/10 min, 10–20 / 25-50 lbs/100 ft³;
• Fluid loss FL, 3-4 cm³/30 min;
• Clay phase MBT, ≤ 10 kg/m³;
• pH, 10 – 11;
• Grease content, 1-3%;
• Content Рљ+ , 3 % – 5 %.

• Stable quality management;
• Optimal conditions for flushing of horizontal wells;
• Optimal conditions for flushing of very deep wells; 
• Maximum resistance of plastic clays;
• High quality primary drilling-in;
• Indexes of return permeability is up to 92 %;
• Ecological safety.